Configuration
Full designation, seals or shields, accuracy, clearance, cage, material and any matched arrangement.
BEARING SPECIFICATION / 30215
30215 Tapered Roller Bearing
75 × 130 × 27.25 mm · A focused approach to combined load. Compare the sourced reference data and specify your SANJ requirement.
Tapered Roller Bearings
30215 at a glance
30215 identifies a tapered roller bearing reference with 75 mm bore, 130 mm outside diameter and 27.25 mm overall width or height.
- Bore / d
- 75 mm
- Outside / D
- 130 mm
- Width / T
- 27.25 mm
Tapered rollers carry combined radial and axial load. Confirm cone and cup designations, overall width and arrangement before selecting a replacement.
Reference configuration: 30215JR
Ratings below belong to the identified JTEKT / Koyo source record. SANJ material, internal design, performance and supply scope require a confirmed quotation and datasheet.
Ratings below belong to the identified JTEKT / Koyo source record. SANJ material, internal design, performance and supply scope require a confirmed quotation and datasheet.
REFERENCE SPECIFICATION
All the details.
One clear source.
Full factual values from the source designation 30215JR. Mounting dimensions and reference mass relate to that design; they must be checked against the final SANJ drawing.
Load ratings: kN · dimensions: mm · speed: min⁻¹ · mass: kg
| Parameter | Reference value |
|---|---|
| d | 75 mm |
| D | 130 mm |
| T | 27.25 mm |
| B | 25 mm |
| C | 22 mm |
| r(min.) | 2 mm |
| r1(min.) | 1.5 mm |
| Basic load ratings : Cr | 178 kN |
| Basic load ratings : C0r | 181 kN |
| Fatigue load limit : Cu | 28.2 kN |
| Limiting speeds(Grease lub.) | 2900 min-1 |
| Limiting speeds(Oil lub.) | 3900 min-1 |
| Load center spread : a | 27.6 mm |
| Constant e | 0.44 |
| Axial load factors : Y1 | 1.38 |
| Axial load factors : Y0 | 0.76 |
| da(min.) | 85 mm |
| db(max.) | 86 mm |
| Da(max.) | 121.5 mm |
| da(min.) | 115 mm |
| db(min.) | 124 mm |
| Sa(min.) | 4 mm |
| Sb(min.) | 5 mm |
| ra(max.) | 2 mm |
| rb(max.) | 1.5 mm |
| Mass(Refer.) | 1.42 kg |
SELECTION CONTEXT
Match the bearing
to its duty.
30215 belongs to the tapered roller bearings family. Its reference envelope is 75 mm bore, 130 mm outside diameter and 27.25 mm overall width or height.
Tapered rollers carry combined radial and axial load. Confirm cone and cup designations, overall width and arrangement before selecting a replacement.
For a manufacturing enquiry, provide the complete designation and operating conditions. Matching the dimensional envelope alone does not confirm interchangeability or equivalent performance.
Is the same size a direct replacement?
No. Matching 75 × 130 × 27.25 mm establishes the boundary dimensions. The full designation, tolerances, clearance, contact angle or roller arrangement, seals, cage, lubrication and performance must also be checked.
Understand bearing load ratings →PREPARE A USEFUL ENQUIRY
Specify what the model
number leaves open.
A complete brief reduces assumptions and gives the quotation a clear technical basis.
Operating duty
Radial and axial loads, speed, temperature, lubrication, fits, environment and expected service.
Supply requirement
Quantity, destination, packing, inspection records, drawing approval and delivery requirement.
CONTINUE COMPARING
More in this bearing family.
Reference imageTapered Roller Bearings
32204 ↗
20 × 47 × 19.25 mm
Bore × outside diameter × width
View specifications →
Reference imageTapered Roller Bearings
32205 ↗
25 × 52 × 19.25 mm
Bore × outside diameter × width
View specifications →
Reference imageTapered Roller Bearings
32206 ↗
30 × 62 × 21.25 mm
Bore × outside diameter × width
View specifications →