Original unbranded tapered roller bearing concept visualization

BEARING SPECIFICATION / 30213

30213 Tapered Roller Bearing

65 × 120 × 24.75 mm · A focused approach to combined load. Compare the sourced reference data and specify your SANJ requirement.

Original product concept visualization

30213 dimensional schematic: bore 65 mm, outside diameter 120 mm, width 24.75 mm — Boundary dimension schematic · not a manufacturing drawing · not to scale

Tapered Roller Bearings

30213 at a glance

30213 identifies a tapered roller bearing reference with 65 mm bore, 120 mm outside diameter and 24.75 mm overall width or height.

Bore / d: 65 mm
Outside / D: 120 mm
Width / T: 24.75 mm

Tapered rollers carry combined radial and axial load. Confirm cone and cup designations, overall width and arrangement before selecting a replacement.

Enquire about 30213 ↗Download reference data ↓

Reference configuration: 30213JR
Ratings below belong to the identified JTEKT / Koyo source record. SANJ material, internal design, performance and supply scope require a confirmed quotation and datasheet.

TECHNICAL SOURCEJTEKT / Koyo · 30213JR ↗Source checked 2026-10-20Reference image source ↗

REFERENCE SPECIFICATION

All the details.
One clear source.

Full factual values from the source designation 30213JR. Mounting dimensions and reference mass relate to that design; they must be checked against the final SANJ drawing.

Load ratings: kN · dimensions: mm · speed: min⁻¹ · mass: kg

30213 — JTEKT / Koyo reference data
Parameter	Reference value
d	65 mm
D	120 mm
T	24.75 mm
B	23 mm
C	20 mm
r(min.)	2 mm
r1(min.)	1.5 mm
Basic load ratings : Cr	160 kN
Basic load ratings : C0r	156 kN
Fatigue load limit : Cu	24.3 kN
Limiting speeds(Grease lub.)	3200 min-1
Limiting speeds(Oil lub.)	4300 min-1
Load center spread : a	24.2 mm
Constant e	0.40
Axial load factors : Y1	1.48
Axial load factors : Y0	0.81
da(min.)	75 mm
db(max.)	77 mm
Da(max.)	110 mm
da(min.)	106 mm
db(min.)	113 mm
Sa(min.)	4 mm
Sb(min.)	4.5 mm
ra(max.)	2 mm
rb(max.)	1.5 mm
Mass(Refer.)	1.18 kg

SELECTION CONTEXT

Match the bearing
to its duty.

30213 belongs to the tapered roller bearings family. Its reference envelope is 65 mm bore, 120 mm outside diameter and 24.75 mm overall width or height.

Tapered rollers carry combined radial and axial load. Confirm cone and cup designations, overall width and arrangement before selecting a replacement.

For a manufacturing enquiry, provide the complete designation and operating conditions. Matching the dimensional envelope alone does not confirm interchangeability or equivalent performance.

Is the same size a direct replacement?

No. Matching 65 × 120 × 24.75 mm establishes the boundary dimensions. The full designation, tolerances, clearance, contact angle or roller arrangement, seals, cage, lubrication and performance must also be checked.

Understand bearing load ratings →

PREPARE A USEFUL ENQUIRY

Specify what the model
number leaves open.

A complete brief reduces assumptions and gives the quotation a clear technical basis.

Configuration

Full designation, seals or shields, accuracy, clearance, cage, material and any matched arrangement.

Operating duty

Radial and axial loads, speed, temperature, lubrication, fits, environment and expected service.

Supply requirement

Quantity, destination, packing, inspection records, drawing approval and delivery requirement.

30213 Tapered Roller Bearing

30213 at a glance

All the details.One clear source.

Match the bearingto its duty.

Is the same size a direct replacement?

Specify what the modelnumber leaves open.

Configuration

Operating duty

Supply requirement

More in this bearing family.

32205 ↗

32206 ↗

32207 ↗

Let’s specify your next bearing.

All the details.
One clear source.

Match the bearing
to its duty.

Specify what the model
number leaves open.